15 litres of pure Mount Tamborine Spring Water, delivered in a BPA free Bottle that is part of our environmentally friendly swap and go system.
Minimum 4 x 15ltr Bottles with initial order; Bottle quantities can be adjusted up or down for future deliveries (The Minimum of 4 x 15ltr Bottles will be automatically added to your cart)
REFRIGERATION: Gas R134A. The refrigerant flow is controlled by a capillary tube which has no moving parts. The compressor is hermetically sealed with an automatic overload protector. Lubricant is not needed
ELECTRICAL: Certificate number 160793. 220v 50hz single phase. A 1.5 metre power cord is supplied. Full load current is 1.2 amps
CONDENSER: Quietly operating, air cooled static type with no moving parts
Tap 1 Approx. 4-8°C Tap 2 Room Temperature Hot tap Approx. 84-87°C
*Intermittent use only, continuous use will result in reduced performance.
SHIPPING WEIGHTS & DIMENSIONS
The B5 series has been our leading bottle top cooler for over 20 years and is still a favourite. “Copied” by many but none have been able to equal or better the quality and longevity of the Waterworks™ B5.
COLD TANK: 4 litre hygienic 304 stainless steel, for superior chilling. The highly polished surface is easy to clean and maintain HOT TANK: 1.8 litre hygienic type 304 stainless steel tank with 500 watt sheathed heater to ensure temperature control. The on/off switch is easily accessible at the back of the unit
CABINET: Gloss Cloud White in colour. The top and front panels are moulded UV treated ABS. The side panels are made from zinc coated steel sheets covered in polymer polyester resin. TAPS: NSF approved durable polypropylene self-closing design. Fully recessed lever type for fast flow. Hot safety tap comes as standard on hot/cold model. Optional hands free push taps now available.
SELF-FILL BOTTLE: A flexible filtration option for home, office or factory. Just fill with tap water for a continuous supply of fresh water. The SFB is the perfect partner for all bottled coolers and ceramic dispensers. AQUANET: The Waterworks™ AN1 is specifically designed for our B5 series coolers. Simply remove the no-spill spike and replace with a scuff ring (SR5) to provide a base for the AN1 and bottle. Ask us about the no-splash valve which is ideal for this set up. NON SPLASH VALVE: Allows the bottle to be changed without excess spillage. Just place the bottle on the cooler and the valve opens to let water through. When removing the bottle, the valve automatically closes.